Spax T-Star Plus Universal Screw 3.5 mm x 30 mm, A2 Stainless Steel, Pack of 200, Raised Countersunk Head, Fully Threaded, 4Cut, 0627000350303

SPAX – Safety, quality and reliability since 1967. Packaged in distinctive brand name green packaging – Locally manufactured in Germany and exported all over the world: Experts in Ennepetal are constantly developing new ideas, increasing the amount of high quality and specially designed SPAX products, for DIY artists, craftsmen, planners and architects from around the world to use – About the product - Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel - MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin - Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers - Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping s

• Usage: universally in all outdoor areas. High corrosion resistance due to A2 stainless steel.
• As a multi head pronounced countersunk for flush penetration and comfortable processing, milled in the wood, brakes on metal. Optimal power transfer and clean fitting even when working with head thanks to Spax T-Star Plus T20 bit guide pegs.
• Effortless work; and longer battery life: no pre-drilling necessary (depending on the wood). Easy penetration, reduction of the gap effect by 4CUT: four edges in the screw tip. Easier cutting of the wood fibre through Spax wave profile.
• Made in Germany: TUV certified. Certified for use: European technical approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114).
• Contents: 1 Spax box, set of 200 universal screws, T-Star plus, raised countersunk head, fully threaded, 4CUT, A2 stainless steel, quality of material: 1.4567, thread diameter (Ød1) = 3.5 mm x total length (Ls) = 30 mm, full thread length (LgV) = 2 5 mm, head diameter (Ødk): 7.0 mm, bit not included.